Sabtu, November 24
Jumaat, November 23
Dugaan
 |
| can you see it?? |
Language and Communication
How to cut a
copper tube with a tube cutter
1.
Place a coil
of copper tube on a worktable.
2.
Unroll the
tube.
3.
Measure the
length and use scriber to mark the copper tube for cutting.
4.
Loosen the
screw of the tube cutter.
5.
Place the
tube in ‘v’ guide of the tube cutter.
6.
Hold up the
copper tube in the left hand and the tube cutter in the right hand.
7.
Tighten the
thumb screw of the tube cutter and set blade on markings on the tube.
8.
Apply
pressure on the table.
9.
Turn the
cutter clockwise and anti-clockwise around the tube until the tube is cut.
10. Ream and file the ends of the tube.
Job title: Cutting a copper tube with a tube
cutter
Equipment/materials: a coil of copper tube , scriber , tube cutter
, file
Procedure:
First, the coil of copper tube is placed on a
worktable and unrolled. The length is measured and a scriber is
used to mark the copper tube for cutting. Next, the screw of the tube
cutter is loosened. After that, the tube is placed in the ‘v’
guide of the tube cutter.
Subsequently,
the copper tube is held up in the left hand and the tube cutter in the
right hand. In the next stage, the thumb screw of the tube cutter is
tightened and the blade is set on the marking on the tube. After
this, pressure is applied on the blade. The cutter is turned clockwise
and anti-clockwise around the tube until it is cut. Finally, the end of
the tube is reamed and filed.
Langgan:
Catatan (Atom)