Ahad, April 7
Isnin, April 1
Rabu, Mac 27
Sabtu, Mac 16
Assignment IT Apps
In this assignment, you will be creating
files using Adobe Photoshop for a new business that you will be opening
soon. Think what type of business
you would like to open and think of a name
for your business. Complete the following steps to create the files for
your business.
Task A – Logo
Design
and create a logo for your new business. Make sure the logo to be unique and memorable. Before you design
a logo, you must understand what a logo
is, what it represents and what
it is supposed to do.
A logo is not just a mark – a logo reflects
a business’s commercial brand via
the use of shape, fonts, colour, and / or images.
Task B - Flyer
Design
a flyer as a mean to promote your company to the public. Your flyer should include the
following features:
·
An
A4 size flyer.
·
Insertion
of logo and other appropriate images or graphics where necessary (max: 3
images/graphics).
·
Information
about your company (e.g. address, contact number, email, and website), products
and services provided.
Note:
Ø Make sure to use all the tools that you have
learned in class, such as marquee, brush, lasso, clone, etc.
Ø Make use of layers and blending options for
logo and flyer.
Ø Give proper background (which is suitable
for flyer).
Ø Your design creativity and also use of other
tools available in Adobe Photoshop
will contribute more on your marks.
Task C
Finally you will produce a written report
after you have completed above tasks. The report should contain and arranged
as follows:
ü
Assignment
Cover
ü
Table
of Contents
ü
Introduction
of your assignment
ü
Task A - with brief explanation on the meaning of
your logo of not more than 150 words
ü
Task B
ü
Conclusion
on how Photoshop software will benefit you as a technical student and any
difficulty encountered. (Recap. Review. Reflect)
ü
References
All the files below should
be saved into a folder and submitted in a soft copy before the dateline:
ü Task A – Adobe Photoshop file
ü Task B – Adobe Photoshop file
ü Task C – Microsoft Word file
-END-
Isnin, Februari 4
Bottom Structure of Ship
Double Bottom Tank
All ocean going ships with the expection of tankers, and most coastal vessels are fitted with double bottom which extends from the fore peak bulkhead almost to the after peak bulkhead. The double bottom consists of the outer shell and an inner shell skin or tank top between 1 m and 1.5 m above the keel. This provides a form of protection in the event of damage to the bottom shell. The tank top, being continuous, increases the longitudinal strength and acts as a platform for cargo and machinery. The double bottom space contain a considerable amount of structure and is therefore useless for cargo. It may however, be used for the carriage of oil fuel, fresh water and water ballast. It is sub-divided longitudinally and transversely into large tanks which allows different liquids to be carried and may be used to correct the heel of a ship or to change the trim. Access to these tanks is arranged in the form of manholes with water tight covers.
 |
| Double Bottom Tank Duct Keel |
Some ships are fitted with a duct keel which extends from within the engine room length to the forward hold. This arrangement allows pipes to be carried beneath the hold spaces and are thus protected against cargo damage. Access onto the duct is arranged from the engine room, allowing the pipes to be inspected and repaired at anytime. At the same time it is possible to carry oil and water pipes in the duct, preventing contamination which occur if the pipes passed trough tanks. Duct keel are particularly important in insulated ships, allowing access to the pipes without disturbing the insulation. Ducts are not required aft since the pipes may be carried through the shaft tunnel.
The duct keel is formed by two longitudinal griders up to 1.83 m apart. This distance must not be exceeded as the griders must be supported by the keel blocks when docking. The structure on each side of the griders is the normal double bottom arrangement. The keel and the tank top centre strake must be strenghthened either by supporting members in the duct or by increasing the thickness of the plate considerably.
 |
| Duct Keel |
Selasa, Januari 29
The Final Year Project Proposal
Title : Final Year
Project
Marine
Engineering/Maritime Concept/
Practicable
Affordable
Economical
Environmental Friendly
Manageable
- · Introduce your proposed final year project
- · Explain your theory and ideas, stating your aims and objectives
- · Highlight your concept, design and materials used,
- · Detailing your management in terms of time, budget and workforce
- · Conclusion: why you think your project can make a difference in marine engineering
Jumaat, Januari 18
Langgan:
Catatan (Atom)